Summit WM3000 Series Controller System Reference Guide 51
Viewing Controller Statistics
The Controller Statistics tab displays an overview of the recent network traffic and RF status for the
controller.
To display the Controller Statistics tab:
1 Select Controller from the main menu tree.
2 Click the Controller Statistics tab at the top of the Controller screen.
3 Refer to the following read-only information about associated MUs:
4 Refer to the Traffic field to assess network traffic for associated APs and radios:
Number of MUs Associated
Displays the total number of MUs currently associated to the controller.
Number of APs Adopted
Displays the total number of Access Points currently adopted by the controller.
Number of Radios Adopted
Displays the total number of radios currently adopted by the controller.
Pkts per second
Displays the packet transmission rate for received and transmitted packets over
last 30 seconds and 1 hour.
Throughput
Displays the traffic throughput for packets received, packets transmitted and
total packets over last 30 seconds and 1 hour.
Avg. Bit Speed
Displays the average bit speed for the controller over last 30 seconds and 1
hour. Use the average bit speed value to help determine overall network speeds
and troubleshoot network congestion.
% Non-unicast pkts
Displays the percentage of non-unicast packets seen (received & transmitted)
by the controller over last 30 seconds and 1 hour. Non-unicast traffic includes
both multicast and broadcast traffic.
Broadcasted, multicasted, and flooded packets are sent over the air at the
slowest rate on every radio in the WLAN and therefore have a much larger
airtime utilization than unicast packets a greater chance of causing collisions.
To Next Page
Loading...