Controller Information
Summit WM3000 Series Controller System Reference Guide76
5 Enter the Password required to send the configuration file from an FTP server.
6 Specify the appropriate Path name to the target directory on the server. The target options are
different depending on the target selected.
7 Click the Transfer button to complete the file transfer. The Message section in the main menu area
displays the file transfer message.
8 Click Abort at any time during the transfer process to abort the file transfer.
Transferring a file from a Server to a Wireless Controller
To transfer a file from a Server to the controller:
1 Refer to the Source field to specify the details of the source file. Use the From drop-down menu and
select Server.
2 Provide the name of the File.
3 Use the Using drop-down menu to configure whether the file transfer is conducted using FTP, TFTP
or HTTP.
FTP transfers require a valid user ID and password.
4 Enter an IP Address of the server receiving the configuration file. Ensure the IP address is valid or
risk jeopardizing the success of the file transfer.
5 Enter the User ID credentials and Password required to transfer the configuration file from a FTP
server.
To Next Page
Loading...