Controller Information
Summit WM3000 Series Controller System Reference Guide78
3 Refer to the following File Systems information.
4 Select CF, USB1 or USB2 and click the Format button (enabled only if the CF or USB are connected to
the controller) to check if the memory device is formatted and available. You will be prompted that
proceeding will erase all data on the disk and if you would like to proceed.
Configuring Automatic Updates
Use the Automatic Updates screen to enable a facility that polls a server address for updated firmware
and configuration every time the controller is booted. If updates are found since the last time the
Name
Displays the memory locations available to the controller.
Available
Displays the current status of the memory resource. By default, nvram
and system are always available.
• A green check indicates the device is currently connected to the
controller and is available.
• A red X indicates the device is currently not available.
Formatted
This displays the format status of the memory devices. This ensures that
the external and internal memory device store the files securely.
• A green check mark indicates the device is currently connected to the
controller and is available.
• A red X indicates the device is currently not available.
To Next Page
Loading...