Network Setup
Summit WM3000 Series Controller System Reference Guide88
2 Select the Domain Network System tab (displayed by default).
Use the Show Filtering Options link to view the details displayed in the table.
3 The Domain Name System tab displays DNS details in a tabular format.
4 Select an IP Address from the table and click the Delete button to remove the selected entry from the
list.
5 Click the Add button to display a screen used to add another domain name server. For more
information, see “Adding an IP Address for a DNS Server” on page 89.
6 Click the Global Settings button to open a screen that allows the domain lookup to be enabled/
disabled and the domain name to be specified. For more information, see “Configuring Global
Settings” on page 89.
Server IP Address
Displays the IP address of the domain name server(s) the system can use
for resolving domain names to IP addresses. Domain look up order is
determined by the order of the servers listed. The first server queried is
the first server displayed. Therefore, ensure obsolete addresses are
periodically removed.
Server Type
Displays whether the DNS IP address entry has been created statically
(manually) or dynamically. The DHCP server provides the dynamic DNS IP
address entry displayed. A static DNS IP address can be created by
clicking the
Add
button.
To Next Page
Loading...