Network Setup
Summit WM3000 Series Controller System Reference Guide90
The order of look up is determined by the order of the servers within Domain Name System tab. The first server
queried is the first server displayed.
3 Enter a Domain Name in the text field. This is the controller’s domain.
4 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
5 Click OK to use the changes to the running configuration and close the dialog.
6 Click Cancel to close the dialog without committing updates to the running configuration.
Configuring IP Forwarding
The IP Forwarding table lists all the routing entries to route the packets to a specific destination. To
view the IP forwarding configuration:
1 Select Network > Internet Protocol from the main tree menu.
2 Select the IP Forwarding tab.
Use the Filtering Option to view the details displayed in the table.
3 The read-only IP Forwarding tab displays the current status between VLANs. To toggle the status of
routing between VLANs, use the Enable/Disable options located at the bottom of the screen.
To Next Page
Loading...