Summit WM3000 Series Controller System Reference Guide 93
Viewing Address Resolution
The Address Resolution table displays the mapping of layer three (IP) addresses to layer two (MAC)
addresses. To view address resolution details:
1 Select Network > Internet Protocol from the main tree menu.
2 Select the Address Resolution tab.
3 Refer to the Address Resolution table for the following information:
Interface
Displays the name of the actual interface where the IP
address was found (typically a VLAN).
IP Address
Displays the IP address being resolved.
MAC Address
Displays the MAC address corresponding to the IP address
being resolved.
Type
Defines whether the entry was added statically or created
dynamically in respect to network traffic. Entries are
typically static.
To Next Page
Loading...