Extreme Networks x-605 - Discharging of the Pb Battery

DISCHARGING OF THE PB BATTERY
Discharging of the Pb battery
DEC
-
Batt type
Stop
INC
+
DEC
Start
Enter
-
INC
+
Set up the charge current on the left and nominal voltage on the right.
Range of discharge current is 0.1-1.0A, the voltage should match the
battery being charged. Press START/ENTER key for more than 3
seconds to start charging.
The screen displays the real-time discharging status. Press
START/ENTER key to alter discharge current. Press START/ENTER
key again to store the parameter value you set. Press BATT
TYPE/STOP key to end the program.
Battery
type
Elapsed
time
Discharge
current
Battery
voltage
Discharged
capacity
26
‘>3 second’