To Next PageTo Next PageWhy is the blue light OFF on my EXXOTEST Data Logger?
If the blue light is OFF on your EXXOTEST Data Logger, it indicates that there is no link with the PC, the peripheral is deactivated or in stand-by mode. It may also indicate a problem with the USB connection.
What to do if the green light is OFF on my EXXOTEST DLC-MUXDIAG-II Data Loggers?
If the green light is OFF on your EXXOTEST Data Logger, it means there is no embedded software. It is needed to reload the software (only if blue and red LEDs are ON).
General| Brand | EXXOTEST |
|---|---|
| Model | DLC-MUXDIAG-II |
| Category | Data Loggers |
| Language | English |
Provides information to install and set up the DLx-MUXDIAGII interface with datalogger function.
Lists standards and specifications relevant to the interface's communication protocols.
Overview of the DLx-MUXDIAGII interface for PC communication with vehicle diagnostic channels.
Main characteristics of the CAN channel, protocol controller, and high-speed line interface.
Details on low-speed CAN interface and LIN/ISO9141 channel characteristics.
Describes the LIN channel characteristics and the MOTOROLA MC33661 line interface.
General technical specifications including dimensions, power, and operating temperature.
Information on the interface's compliance with Electromagnetic Compatibility (ECM) standards.
Pinout details for the 16-pin J1962 diagnostic connector used by the interface.
Details of the USB connector and explanation of the interface's LED status indicators.
Description of datalogger versions (DLO/DLC) and memory card usage guidelines.
Details about the required PC application for configuring and managing the datalogger function.
Technical characteristics of the remote control, including temperature, power, and connectors.
Explains LED indicators on the remote control: flashing principles and top 6 LEDs.
Explains the operation of the 'Start' and 'Stop' buttons for session control.
Overview of driver evolution, USB driver generations, and support status.
Details on obsolete Windriver and the Exxotest v1.x/v2.x drivers, including development.
Details on the supported operating systems for EXXOTEST® PCI drivers.
Advisory regarding the use of new drivers with third-party applications.
Outlines the goal, warning, and steps for updating drivers and associated EXXOTEST® applications.
Instructions on how to launch the driver installation file from CD or download.
Guide to selecting installation components, including specific steps for PCI card users.
Covers starting the installation, monitoring progress, and deleting old drivers.
Final step to complete the installation and connect the interface to the PC.
Explanation of interface LED status indications for troubleshooting.
Contact information for technical support for any issues encountered.
Pinout configurations for the optional AMUX-2C2L adapter for various CAN/LIN/ISO interfaces.
Record of document versions, dates, and modifications made by authors.
