What to do if EZ Health ABP-B1 Blood Pressure Monitor shows no pulse or blood pressure?
If your EZ Health Blood Pressure Monitor isn't sensing a pulse or blood pressure, make sure the cuff is correctly fastened and tight enough. If not, refasten the cuff following the instructions. After this, wait at least 5 minutes before attempting another measurement.
How to fix incorrect readings on EZ Health ABP-B1 Blood Pressure Monitor?
If you're getting incorrect readings on your EZ Health Blood Pressure Monitor, ensure the cuff is well-fastened following the instructions. Wait at least 5 minutes before taking another measurement. Repeat the steps listed under “How to Take a Measurement.” If the issue persists, and you have special characteristics, please refer to a physician.
Why EZ Health ABP-B1 Blood Pressure Monitor is not inflating?
If your EZ Health Blood Pressure Monitor isn't inflating properly, first ensure the cuff is securely fastened according to the instructions. If the issue persists, it may be due to a pump, venting valve, or deflation valve failure, in which case you should contact your distributor.
General| Model No. | ABP-B1 |
|---|---|
| Cuff Circumference | Regular Cuff 22-32 cm, 8.7” ~ 12.6” Large Cuff 32-42 cm, 12.6”-16.5” |
| Accessories | Storage Case, Owner’s Manual, Adapter |
| Display | LCD Digital Display with backlight |
| Measurement Method | Oscillometric method |
| Measurement Range | Pressure: 20~280mmHg Pulse: 40~190 / minute |
| Accuracy/ Calibration | Pressure:± 3mmHg or 2% of reading Pulse: ± 5% of reading |
| Measuring Interval | 1 mmHg |
| Memory capacity | 80 sets of memory |
| Inflation | Automatic inflation by air pump |
| Deflation | Automatic liner pressure deflation valve |
| Pressure Release | Automatic exhaust valve |
| Operating Temperature / Humidity | +10℃~+40℃ (50 0F~104 0F) 40%~85% R.H. maximum |
| Storage Temperature / Humidity | -20℃~+50℃ (-4 0F~122 0F) 15%~85% R.H. maximum |
| Sensor | Semiconductor pressure sensor |
| Power Supply | Adaptor Input 120VAC, Output 6VDC 4 “AA” alkaline batteries |
| Battery Life (Alkaline batteries) | Approx. 200 uses |
Weight and Dimensions| Unit Weight | Approx. 400grams (not including batteries) |
|---|---|
| Unit dimensions | Approx. 115 (l) x 125 (w) x 50 (h) mm |
Details the function of each button on the blood pressure monitor unit.
Explains the meaning of various symbols shown on the device's LCD screen.
Guides users on how to change the spoken language for voice prompts.
Explains the proper placement and positioning of the arm cuff for accurate readings.
Provides instructions on deleting stored blood pressure measurements from the device memory.
Offers guidance on how to properly store the blood pressure monitor when not in use.
Details the recommended methods for cleaning the blood pressure monitor and its components.
To Next Page