Why is my EZ Lite Cruiser DX8, DX10 & DX12 joystick flashing one red light?
If the joystick controller on your EZ Lite Cruiser Wheelchair is flashing a No.1 red light, it means the battery is low. To fix this, charge the battery.
What to do if EZ Lite Cruiser DX8, DX10 & DX12 Wheelchair joystick controller is flashing 4 or 5 red lights?
If the joystick controller on your EZ Lite Cruiser Wheelchair is flashing a No.4 or No.5 red light, it means the motor or electromagnetic brake is not connected. To resolve this, insert the motor cable and tighten the plug.
How to fix EZ Lite Cruiser DX8, DX10 & DX12 if power won’t turn on?
If your EZ Lite Cruiser Wheelchair power won’t turn on, ensure the host power is connected. Also, check the four core plug connection with the joystick. Finally, ensure the battery is charged.
Why is my EZ Lite Cruiser DX8, DX10 & DX12 Wheelchair joystick flashing two red lights?
If the joystick controller on your EZ Lite Cruiser Wheelchair is flashing a No.2 red light, it indicates that the joystick lacks a communication signal. To address this, connect the four core plug to the joystick or replace the joystick.
Why is my EZ Lite Cruiser DX8, DX10 & DX12 vibrating and noisy?
If your EZ Lite Cruiser Wheelchair is vibrating and making noise while moving, it could be due to a low maximum speed setting. Try adjusting the maximum speed. Alternatively, the motor might be damaged, requiring a replacement.
General| Brand | EZ Lite Cruiser |
|---|---|
| Model | DX8, DX10 & DX12 |
| Category | Wheelchair |
| Language | English |
Learn to move forward, backward, and turn the chair using the joystick.
Essential guidelines for safely handling and maintaining the battery.
Step-by-step instructions for charging the battery correctly.
How to operate the chair using the electric joystick controls.
Instructions for operating the chair manually using the red levers.
To Next Page
