5
3
Installing the waterproof kit (Optional)
If the camera is installed outdoors or in the humid environment, please use the
waterproof kit.
Cut off one side of the network cable (A). Put the A side through the gasket and the encap.
Connect a new network plug with the cable (A).
Insert the gasket to the network interface.
Insert the network plug into the network interface of the camera.
Insert the gasket into the encap, and tighten up the encap and lock nut.
Connect the B side with the LAN interface of the router or PoE switch.
Router
To Next Page
Loading...
Need help?
General
