www.f-onekites.com
SETTING UP YOUR KITE
9
1 - Unroll your line facing the wind and lay your bar down with the F-one logo facing
up (red end left, green end right).
2 - Untangle the line by walking towards the kite. Spread your lines with the grey
front lines in the center, the red back line on the left and the green back line on the
right.
3 - Check the bridle is free of knots
4 - 5 Connect the front lines to the gray front connectors of the kite. You need to do
a lark heads knot with the connectors on the kite.
6 - Connect your back lines the same way, green on green and red on red. Be care-
ful, the front and back lines should not cross each other’s.
LARK HEAD
R
E
D
B
A
C
K
L
I
N
E
G
R
E
E
N
B
A
C
K
L
I
N
E
F
R
O
N
T
L
I
N
E
F
R
O
N
T
L
I
N
E
WIND
To Next Page