FAAC A1400 AIR RDT - Plate on Telescopic Profile; Preparing External Carriages

A1400 AIR RDT 36 532119 04 - Rev. C





43
44

Translation of the original instructions
ENGLISH
9.7 PLATE ON TELESCOPIC PROFILE
1. Open the external leaves completely until they come in contact
with the external mechanical stops 75- .
2. Refer to tables A or B for single right or left leaf 110or double
leaf 112, to drill the 5 mm diameter holes on the outside of
the telescopic profile, as shown in 43- to secure the plate
of the steel cable.
3. Use the reference line on the telescopic profile and relevant ad-
hesive template to keep aligned the 2 holes of plate 43-.
4. After that fix the plates with the screws supplied 43-.

9.8 PREPARING EXTERNAL CARRIAGES
1. Assemble the supports and bracket 44-.
2. Mount the belt connection unit 44-.


3
4
3
Nm
4
6
4
Nm