A1400 AIR RDT 48 532119 04 - Rev. C
63
Translation of the original instructions
ENGLISH
11.6 FIT THE CLOSING COVER
!
On the profile there must be:
- the safety cables 63-
- the spacers 63-
- the side profiles 61-
and the cover fastening brackets 63
1. Place the cover on the profile 62.
2. Lock the open cover 63-
(lift it, then push it into the
profile).
3. Fasten safety cables to the casing 63-
and close the casing.
!
The safety cables must be correctly installed to protect from the risk
of accidental casing fall.
Slightly push on the casing to insert the blocks onto the brackets
63-
.
The markings on the casing allow it to be adapted to varying leaf
thickness. The breaking points 63-
make it possible to elimi-
nate the profile section in excess.
To Next Page
Loading...
