A1400 AIR RDT 50 532119 04 - Rev. C
66
1
2
3
1
2
2
1
3
68
4
4
67
Translation of the original instructions
ENGLISH
11.9 ALIGN MOTOR BLOCK
The motor block must be aligned with the motor.
1. Apply an adhesive strip at the top of the profile 66-
.
2. Insert the adjustment screw
on the motor block bracket with the
head up in contact with strip 66-
.
3. Adjust with nut and lock nut 66-
.
11.11 MOUNT THE CABLE GLAND GUIDES
!
The guides prevent interference between cables and moving parts.
Install guides for running electrical cables inside the support profile
67-
and
).
11.10 MOUNT MOTOR BLOCK XM LOCK
1. Install the motor block by engaging the retainer hook
in the slot
of the motor block 67.
2. check correct engagement of the motor block 67-
.
3. At the end of the check tighten screw 67-
.
To Next Page
Loading...
