Features
- Universal controller for all kinds of midi controllable hard- and software
- iPad compatible with camera connection kit
- Control surface script for Live 8/9 is shipped with the controller
- USB interface with bus powering - class compliant / no driver necessary (consumption < 500mW)
- MIDI in and out ports with routing and merge functionality
- 8 push encoders without detents (resolution about 36 pulses)
- Encoder push buttons can send commands (fully programmable)
- 8 buttons with LED for switchable parameters
- 4-digit-display to show control values and programming data
- 14 bit high resolution encoder mode for sensitive parameters
- Programmable value ranges with min/max values
- Data feedback for encoders and faders avoid value jumps
- All controls (incl. push buttons) fully programmable in the device by channel, type, number and mode
- Different command types like control change (CC), pitch bend, aftertouch, program change and notes
- Advanced programming functions like copy, paste and group sets
- 8 independent groups for encoders and faders/buttons (controlled by shift key)
- About 264 commands per setup (33 controls x 8 groups)
- 18 setups with backup/restore function contain all controller settings
- Very compact design in a black casing with metal faceplate (laser engraving, 180x105x70 mm, 350 g)
System requirements
- PC or Mac with a free USB port (1.0 or higher) or any USB hub (connection by inclosed USB cable)
- iPad with iOS5 or higher (connection by apples camera connection kit)
- MIDI device with standard midi in port (5pin DIN socket connection by enclosed adapter cable)
- USB power adapter (5V min 100mA) if you want to control only midi gear
To Next Page
Loading...