FAFREES F-100 - Page 14

11
Restore factory settings
Press and hold the “-” and “i” buttons for more than 2 seconds to enter the interface
of restoring factory settings. Select dEF-Y to restore the default parameters, and
select dEF-N to not restore the default parameters. If dEF-Y is selected, long press the
“i” button for more than 2 seconds and the display will show dEF-0, and
automatically start to restore the default setting. After restoring the default setting,
the display will automatically return to the normal display interface.
Error Code
Error Code
Definition
21
Abnormal current
22
Hand throttle failure
23
Motor Abnormality
24
Motor Hall Signal Abnormality
25
Brake failure
30
Communication failure