Fagor 3IF-ZONE96C4S - Page 60

60
OPERATION
Turnotheappliance
● The appliance operates when at least one cooking zone is on.
● To switch o the appliance touch the on/o sensor (1).
Deactivate cooking zones
● Slide your nger across the heat selection sensor (2) to reduce the heat setting to "0".
If a cooking zone is still hot, its display (3) will alternate between showing the
letter"H"and"0"andafterapplianceisswitchedoonlytheletter"H"willbe
shown.
If a cooking zone is still hot, the relevant display (3) will show the letter "H" to
indicate residual heat.