Fagor 6H-775TCX - Programmed Cooking: Delayed Start

9
2 / USING YOUR APPLIANCE
EN
--
Cooking with delayed start and chosen
cooking end time
PPrroocceeeedd aass wwiitthh pprrooggrraammmmeedd ccooookkiinngg..
- Press the button until the cooking end
time indicator starts to flash .
The display flashes to indicate that you can
now adjust the setting (fig.
1).
- Press the
++
or
--
button to set the desired
cooking end time.
Example: end of cooking at 16:00 (fig.
2).
The cooking end time is recorded
automatically after a few seconds or
alternatively, valide by pressing the
““
SSttaarrtt””
button.
The cooking end time display stops flashing.
AAfftteerr tthheessee 33 sstteeppss,, tthhee oovveenn hheeaattiinngg iiss
ddeellaayyeedd ssoo tthhaatt ccooookkiinngg eennddss aatt 1166::0000..
At the end of cooking (end of programmed
time),
- the oven turns off,
- the cooking time indicator and 0:00 both flash
(fig.
3),
- a series of beeps sounds for a few minutes.
The beeping can be stopped by pressing
““SSttoopp””
.
The display returns to the time of day.
In the case of programmed cooking cycles, the
cavity lights up until cooking begins, and
remains lit until cooking is finished.
fig.1
fig.2
fig.3
PROGRAMMED COOKING
••