Fagor 8035-T - Page 165

 Installation manual
CNC 8035
MACHINE PARAMETERS
Serial line parameters
4.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·165·
EOFCHR (P9)
Indicates the character used to indicate "end of text" (end of file) when communicating with a general
peripheral device.
XONXOFF (P10)
Indicates whether the XON-XOFF communications protocol is active or not when operating with a
generic peripheral.
Value Meaning
0EOT.
1 ESC.
2SUB
3ETX
Default value: 0
Value Meaning
ON It is active.
OFF It is NOT active.
Default value: ON