·179·
CNC 8035
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
5
CONCEPTS
5.1 Axes and coordinate systems
Given that the purpose of the CNC is to control the movement and positioning of axes, it is necessary
to determine the position of the point to be reached through its coordinates.
The CNC allows you to use absolute, relative or incremental coordinates throughout the same
program.
Axis nomenclature
The axes are named according to DIN 66217.
Characteristics of the system of axes:
X and Y main movements on the main work plane of the machine.
Z parallel to the main axis of the machine, perpendicular to the main XY plane.
U, V, W auxiliary axes parallel to X, Y, Z respectively.
A, B, C Rotary axes on each axis X, Y, Z.
It is recommended to save the machine parameters as well as the PLC program and
files into the hard disk (KeyCF) or in a peripheral or PC to avoid losing them.
To Next Page
Loading...
