Installation manual
CNC 8035
CONCEPTS
Axes and coordinate systems
5.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·181·
Example of lathe.
The machine has two regular linear axes: X and Z and an analog spindle (S).
Setting of g.m.p. AXIS1 (P0) through AXIS8 (P7).
The CNC activates a machine parameter table for each axis (X, Z) and another one for the spindle
(S).
a.m.p. AXISTYPE (P0) must be set as follows.
s.m.p. SPDLTYPE (P0) must be set as follows:
Likewise, a.m.p DFORMAT (P1) and s.m.p. DOFORMAT (P1) must be properly set to indicate their
display formats.
AXIS1 (P0) = 1 X axis associated with feedback X1 and output O1.
AXIS2 (P1) = 3 Z axis associated with feedback X2 and output O2.
AXIS3 (P2) = 10 Spindle (S) associated with feedback X3 and output O3.
AXIS4(P3)=0
AXIS5 (P4) = 0
AXIS6 (P5) = 0
AXIS7 (P6) = 0
AXIS8 (P7) = 0
X axis AXISTYPE (P0) = 0 Regular linear axis
Z axis AXISTYPE (P0) = 0 Regular linear axis
Spindle SPDLTYPE (P0) = 0 ±10V spindle analog output.
To Next Page
Loading...
