Programming manual
CNC 8055
CNC 8055i
PATH CONTROL
6.
·M· & ·EN· MODELS
SOFT: V02.2X
·101·
Threading (G33)
Example:
We would like to a make a thread in a single pass in X0 Y0 Z0, with a depth of 100 mm and a pitch
of 5 mm using a threadcutting tool located in Z10.
G90 G0 X Y Z ; Positioning
G33 Z -100 L5 ; Threading
M19 ; Spindle orientation
G00 X3 ; Cutter withdrawal
Z30 ; Withdrawal (exit the hole)
To Next Page
Loading...
