Programming manual
CNC 8055
CNC 8055i
ADDITIONAL PREPARATORY FUNCTIONS
7.
·M· & ·EN· MODELS
SOFT: V02.2X
·121·
Scaling factor (G72)
7.6 Scaling factor (G72)
By using function G72 you can enlarge or reduce programmed parts.
In this way, you can produce families of parts which are similar in shape but of different sizes with
a single program.
Function G72 should be programmed on its own in a block. There are two formats for programming
G72 :
• Scaling factor applied to all axes.
• Scaling factor applied to one or more axes.
To Next Page
Loading...
