Fagor 8055 M - Page 140

·140·
Programming manual
CNC 8055
CNC 8055i
8.
TOOL COMPENSATION
·M· & ·EN· MODELS
SOFT: V02.2X
Tool radius compensation (G40, G41, G42)
Example of machining with radius compensation:
The programmed path is shown with solid line and the compensated path with dashed line.
Tool radius 10mm
Tool number T1
Tool offset number D1
; Preset
G92 X0 Y0 Z0
; Tool, offset and spindle start at S100
G90 G17 S100 T1 D1 M03
; Begins compensation
G41 G01 X40 Y30 F125Y70
X90
Y30
X40
; Cancels compensation
G40 G00 X0 Y0
M30