Fagor 8055 M - Page 344

·344·
Programming manual
CNC 8055
CNC 8055i
13.
HIGH-LEVEL LANGUAGE PROGRAMMING
·M· & ·EN· MODELS
SOFT: V02.2X
Variables
TOKn
This variable allows the value assigned to the wear in length (K) of the indicated tool offset (n) to
be read or modified in the tool offset table.
TLFDn
This variable allows the tool offset number of the indicated tool (n) to be read or modified in the tool
table.
TLFFn
This variable allows the family code of the indicated tool (n) to be read or modified in the tool table.
TLFNn
This variable allows the value assigned as the nominal life of the indicated tool (n) to be read or
modified in the tool table.
TLFRn
This variable allows the value corresponding to the real life of the indicated tool (n) to be read or
modified in the tool table.
TMZTn
This variable allows the contents of the indicated position (n) to be read or modified in the tool
magazine table.