Fagor 8055 M - Variables Associated with the Live Tool

Programming manual
CNC 8055
CNC 8055i
HIGH-LEVEL LANGUAGE PROGRAMMING
13.
·M· & ·EN· MODELS
SOFT: V02.2X
·365·
Variables
13.2.13 Variables associated with the live tool
Read-only variables
ASPROG
It must be used inside the subroutine associated with function M45.
Returns the revolutions per minute programmed in M45 S. If programmed only in M45, the value
0 will be used.
The ASPROG variable is updated just before executing the M45 function so it is already updated
when executing its associated subroutine.