·370·
Programming manual
CNC 8055
CNC 8055i
13.
HIGH-LEVEL LANGUAGE PROGRAMMING
·M· & ·EN· MODELS
SOFT: V02.2X
Variables
13.2.17 Software & hardware configuration variables
Read-only variables
HARCON
It indicates, with bits, the CNC's hardware configuration. The bit will be "1" when the relevant
configuration is available.
CNC8055 model:
Bit Meaning
4,3,2,1 0000
0010
8055 FL model.
8055 Power model.
5 Sercos integrated into CPU board.
6 Sercos module on manager board.
7 Axes module.
10,9,8 001
010
011
100
One I/O module.
Two I/O modules.
Three I/O modules.
Four I/O modules.
14 It has analog video.
15 It has CAN integrated into the CPU board.
18,17,16 Keyboard type (technical service department).
20.19 CPU type (technical service department).
23,22,21 1xx CPU PPC5200.
26,25,24 000
001
Color LCD Monitor.
Monochrome LCD monitor.
30 Ethernet connector integrated in the CPU.
31 Compact flash memory (KeyCF).
To Next Page
Loading...
