Fagor 8055 M - Page 371

Programming manual
CNC 8055
CNC 8055i
HIGH-LEVEL LANGUAGE PROGRAMMING
13.
·M· & ·EN· MODELS
SOFT: V02.2X
·371·
Variables
CNC8055i model:
HARCOA
It indicates, with bits, the CNC's hardware configuration. The bit will be "1" when the relevant
configuration is available.
CNC8055 model:
Bit ·1· only indicates whether the hardware has a connector for the compact flash or not, it does not
indicate whether the compact flash is inserted or not.
CNC8055i model:
Bit ·1· only indicates whether the hardware has a connector for the compact flash or not, it does not
indicate whether the compact flash is inserted or not.
Bit Meaning
4, 3, 2, 1 0100
0110
8055i FL model.
8055i Power model.
5 Sercos (digital model).
6 Reserved.
9, 8, 7 000
001
010
011
Expansion board missing.
"Feedback + I/O" expansion board.
Feedback-only expansion board.
I/O-only expansion board.
101
110
111
"Axes 2" board for expansion of "feedback + I/O".
"Axes 2" board for expansion of feedback only.
"Axes 2" board for expansion of I/O only.
10 Axis board with 12-bit (=0) or 16-bit (=1) Digital/Analog converter.
12, 11 Reserved.
14, 13 Reserved.
15 It has CAN (digital module).
18,17,16 Keyboard type (technical service department).
20.19 CPU type (technical service department).
23,22,21 1xx CPU PPC5200.
26,25,24 000
001
Color LCD Monitor.
Monochrome LCD monitor.
30 Ethernet..
31 Compact flash memory (KeyCF).
Bit Meaning
0 Axis module 2.
1 It has a connector for compact flash.
10 The axis board is "Axis module SB"
Note: Bit 0 of HARCOA must be set to 0.
Bit Meaning
0 "Axes 2" board.
1 It has a connector for compact flash.
10 The axis board is "Axis module SB"
Note: Bit 0 of HARCOA must be set to 0.