·382·
Programming manual
CNC 8055
CNC 8055i
13.
HIGH-LEVEL LANGUAGE PROGRAMMING
·M· & ·EN· MODELS
SOFT: V02.2X
Variables
GGSL
It returns the status of functions G75 through G299. The status of each one of the functions will be
given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not active
or when not available in the current software version.
GGSM
It returns the status of functions G300 through G324. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSN
It returns the status of functions G325 through G349. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSO
It returns the status of functions GG350 through G374. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSP
It returns the status of functions G375 through G399. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSQ
It returns the status of functions G400 through G424. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GSn
Returns the status of the G function indicated (n). 1 if it is active and 0 if not.
MSn
Returns the status of the M function indicated (n). 1 if it is active and 0 if not.
These functions are M00, M01, M02, M03, M04, M05, M06, M08, M09, M19, M30, M41, M42, M43,
M44 and M45.
G299 G298 G297 G296 G295 ... G279 G278 G277 G276 G275
G324 G323 G322 G321 G320 ... G304 G303 G302 G301 G300
G349 G348 G347 G346 G345 … G329 G328 G327 G326 G325
G374 G373 G372 G371 G370 … G354 G353 G352 G351 G350
G399 G398 G397 G396 G395 … G379 G378 G377 G376 G375
G424 G423 G422 G421 G420 … G404 G403 G402 G401 G400
(P120=GS17)
It assigns the value 1 to parameter P120 if the G17 function is active and 0 if not.
To Next Page
Loading...
