Fagor 8055 M - Definition of the Inclined Plane (G49)

Programming manual
CNC 8055
CNC 8055i
COORDINATE TRANSFORMATION
15.
·M· & ·EN· MODELS
SOFT: V02.2X
·425·
Movement in an inclined plane
15.1.1 Definition of the inclined plane (G49)
With function G49, it is possible to define a coordinate transformation or, in other words, the inclined
plane resulting from that transformation. There are several ways to define G49.
G49 X Y Z A B C
Defines the inclined plane resulting from rotating around the X axis first and around the Z axis last
the amounts indicated in A, B, C respectively.
X Y Z
Define the coordinate origin of the inclined plane.
Indicate the X, Y, Z coordinates with respect to the current coordinate origin.
A B C
They define the inclined plane resulting from:
Having rotated around the X axis first the amount indicated by A.
The new coordinate system resulting from this transformation is called X Y' Z' because the Y, Z axes
have been rotated.
Then, it must be rotated around the Y' axis the B amount.
In the figure, the new coordinate system resulting from this transformation is called X'' Y' Z" because
the X, Z axes have been rotated.