·426·
Programming manual
CNC 8055
CNC 8055i
15.
COORDINATE TRANSFORMATION
·M· & ·EN· MODELS
SOFT: V02.2X
Movement in an inclined plane
And last, rotate around the Z'' axis the amount indicated by C.
G49 X Y Z Q R S
Spherical coordinates. Defines the inclined plane resulting from rotating around the Z axis first, then
around the Y axis and again around the Z axis the amounts indicated by Q, R, S respectively.
X Y Z
Define the coordinate origin of the inclined plane.
Indicate the X, Y, Z coordinates with respect to the current coordinate origin.
Q R S
They define the inclined plane resulting from:
Having rotated around the Z axis first the amount indicated by Q.
In the figure, the new coordinate system resulting from this transformation is called X' Y' Z because
the X, Y axes have been rotated.
To Next Page
Loading...
