·428·
Programming manual
CNC 8055
CNC 8055i
15.
COORDINATE TRANSFORMATION
·M· & ·EN· MODELS
SOFT: V02.2X
Movement in an inclined plane
R
Defines which of the axes of the new Cartesian plane (X' Y' ) is aligned with the edge. If R0, the
X' axis is lined up and If R1, the Y' axis is lined up. If not programmed, a value of R0 is assumed.
S
Lets rotate the coordinates in the new Cartesian plane.
G49 T X Y Z S
It defines a new work plane perpendicular to the direction of the tool.
Is it a good idea to have a swivel or angled spindle (machine parameter "XFORM (P93) set to 2 or
3) when using this type of definition.
T
Indicates that one wishes to select a work plane perpendicular to the orientation of the tool.
X Y Z
Define the coordinate origin of the inclined plane.
Indicate the X, Y, Z coordinates with respect to the current coordinate origin.
S
Lets rotate the coordinates around the new Z' corresponding to the new work plane.
To Next Page
Loading...
