Fagor 8055 M - Page 474

·474·
Programming manual
CNC 8055
CNC 8055i
E.
·M· & ·EN· MODELS
SOFT: V02.2X
Programming assistance screens of the system.
Syntax help: ISO language
Page 1033 Structure of a program block.
Page 1034 Positioning and linear interpolation: G00, G01 (part 1).
Page 1035 Positioning and linear interpolation: G00, G01 (part 2).
Page 1036 Circular-helical interpolation: G02, G03 (part 1).
Page 1037 Circular-helical interpolation: G02, G03 (part 2).
Page 1038 Circular-helical interpolation: G02, G03 (part 3).
Page 1039 Circular tangent path: G08 (part 1).
Page 1040 Circular tangent path: G08 (part 2).
Page 1041 Circular path through 3 points: G09 (part 1).
Page 1042 Circular path through 3 points: G09 (part 2).
Page 1043 Electronic threading: G33
Page 1044 Rounding: G36.
Page 1045 Tangential entry: G37.
Page 1046 Tangential exit: G38.
Page 1047 Chamfer: G39.
Page 1048 Dwell/interruption of block preparation: G04, G04K.
Page 1049 Square/round corner: G07, G05.
Page 1050 Mirror image: G11, G12, G13, G14.
Page 1051 Programming of planes and longitudinal axis: G16, G17, G18, G19, G15.
Page 1052 Work zones: G21, G22.
Page 1053 Tool radius compensation: G40, G41, G42.
Page 1054 Tool length compensation: G43, G44.
Page 1055 Zero offsets.
Page 1056 Millimeters/inches G71, G70.
Page 1057 Scaling factor: G72.
Page 1058 Pattern rotation: G73.
Page 1059 Home search: G74.
Page 1060 Probing: G75.
Page 1061 Axis coupling (slaving): G77, G78
Page 1062 Absolute/incremental: G90, G91.
Page 1063 Coordinate preset and Polar origin: G92, G93.
Page 1064 Feedrate programming: G94, G95.
Page 1065 Preparatory G functions associated with the canned cycles: G79, G80, G98
y G99.
Page 1066 Programming of auxiliary functions F, S, T and D.
Page 1067 Programming of auxiliary (miscellaneous) M functions.