Fagor 8H-185BB - Page 42

OPERATION
Timed operation
To set the appliance to switch o after a spe-
cic duration:
● Set the function selector knob and the tem-
perature selector knob to your preferred
settings.
● Touch MENU repeatedly until the display
shows dur (duration) briey and the
symbol will be ashing.
● Set the desired duration from 1 minute to
10 hours using the < / > sensors.
The set duration will be memorised after about
7 seconds. The display will show the current
time and the symbol.
Once the duration time has elapsed the
oven will turn o automatically. You will hear
an alarm and the and symbols will be
ashing.
● Set the oven function selector knob and
the temperature selector knob in o posi-
tion.
● Touch and hold < / > or MENU to mute
the alarm. The and will be o and
the display will show the current time after
approximately 7 seconds.
Delayed timed operation
In order to set the appliance to switch o at a
specic time after a set Duration has elapsed,
set the Duration and the End Time:
● Touch MENU repeatedly until the display
shows dur (duration) briey and the
symbol will be ashing,
● Set the desired duration from 1 minute to
10 hours using the < / >sensors.
● Touch MENU repeatedly until the display
shows End briey and the symbol will
be ashing.
● Set the End Time using the < / >, sensors,
a maximum of 23 hours and 59 minutes
ahead.
● Set the function selector knob and the
temperature selector knob to preferred
settings. The and functions are now
active. The appliance will switch on at
End Time minus Duration (i.e. if the set
Duration is 1 hour and the set End Time
is 14:00, the appliance will automatically
switch on at 13:00).
Once the Duration time has elapsed the oven
will turn o automatically. You will hear an
alarm and the and will be ashing.
● Set the oven function selector knob and
the temperature selector knob in o posi-
tion.
● Touch and hold < / > or MENU to mute
the alarm. The and will be o and
the display will show the current time after
approximately 7 seconds.
42