Important!
Do not wash telescopic runners in a dish-
washer.
Removing telescopic runners
Installing telescopic runners
Removing wire shelf supports
Installing wire shelf supports
l Oven is equipped with easily removable
wire shelf supports. To remove them for
washing, pull the front catch, then tilt the
support and remove from the rear catch.
lOvens has stainless steel sliding tel-
escopic runners attached to the wire shelf
supports. The telescopic runners should
be removed and cleaned together with
the wire shelf supports. Before you put
the baking tray on the telescopic runners,
they should be pulled out (if the oven is hot,
pull out the telescopic runners by hooking
the back edge of the baking tray on the
bumpers in the front part of the telescopic
runners) and then insert them together
with the tray.
CLEANING AND MAINTENANCE
60
To Next Page
Loading...
