22/07/2019
40
SERVICE MANUAL
EVO FRONT LOADING DISHWASHER
9.5.11. LONG WASH
In a dishwasher, with the encoder set to long wash, if the door is closed (IP=1) and the tank full (PT=0), the long
wash cycle starts to run, and the machine active LED L2 flashes the whole time.
9.5.12. SOFT START
“Soft Start” is a function which controls the start-up of the pump so that the pump starts at a low speed which
increases gradually.
The wash pump has a “Soft Start” for a gentle start. The ramp for this “Soft Start” is defined below:
o Time (s): 0 Voltage: 115
o Time (s): 1 Voltage: 115
o Time (s): 2 Voltage: 115
o Time (s): 3 Voltage: 115
o Time (s): 4 Voltage: 115
o Time (s): 5 Voltage: 115
o Time (s): 6 Voltage: 115
o Time (s): 7 Voltage: 115
o Time (s): 8 Voltage: 135
o Time (s): 9 Voltage: 165
o Time (s): 10 Voltage: 200
To Next Page
Loading...
