71
The equipment should be installed in accordance with the dimensions shown in Fig.2. Appliances
must only be installed on and/or against fireproof surfaces.
Inspect final location of the machine prior to installation to prevent damage during use.
Unless otherwise indicated, the parts that have been protected by the manufacturer must not be
manipulated by the installer.
3.3 MINIMUM DISTANCE
Minimum distance from other sources of heat
on the left side 400mm. Fig. 1
Warning: An excessive room temperature on
the left-hand side of the appliance may trigger
the appliance safety disconnection.
We recommend a distance of 500 mm on the
left-hand side of the appliance to leave room
for repair and maintenance work. Fig. 2
The IPX5 plate must be fastened on the rear of
the ovens. Fig. 3.
Check the stability of the oven.
3.4 INSTALLATION OF TABLE TOP MODELS
Level the frame
horizontally before
placing the oven on
the frame.Fig.4
The appliance must be
horizontally leveled.
Fig. 6
To Next Page
Loading...
