Fagor Advance AE-0623 - Electrical Connection; Appliance Electrical Connection

EN
72
Rest the oven on the
frame and line up the
supports with the
holes on the frame.
Fig.5
The mobile load trolley
(optional) must be
horizontal on the
appliance. Fig.7
(Optional in model
202).
The trays are placed in the oven at a maximum height of 1, 6 m. if and
when original accessories are used (except in overlapping ovens
Overlapping ovens or in any other case where the height is exceeded,
it should be applied on the front of the oven, to 1.6 m in height from the
ground and in a clearly visible location, the following adhesive that is
included in the package.
To prevent scalding, do not use cargo containers with liquids or
for cooking foods that become fluids by heating to higher levels
than those that can be easily observable.
3.5 ELECTRICAL CONNECTION.
An AUTHORISED TECHNICIAN should always carry out the appliance’s
electrical connection.