SERVICE MANUAL
ADVANCE OVENS
04/02/2020 119
By pressing the Time/Spike/Delta display buttons, the values are selected numerically.
When the true temperature of the core reaches the selected value, an acoustic warning is heard. To switch off
the alarm, press the START/STOP button or open the door. If the door is not opened, or if the START/STOP,
button is not pressed, the acoustic warning is repeated for 30 seconds every 3 minutes, up to a maximum of
15 minutes.
17.10. HEATING POWER AND FAN SPEED
This function is used to vary the oven power (heat) and fan speed. There are 4 options:
o Maximum power / maximum speed
o Minimum power / maximum speed.
o
o Minimum power / average speed.
o Minimum power / minimum speed.
17.11. MAIN MENU
The remaining functions of the oven are found in the main menu, except for the SAT, submenu, which is in an
additional screen that can only be entered by the technician, using a special combination of keys in the Initial
Screen.
17.12. MENU
The Menu option displays a screen with 6 additional options for the user.
17.12.1. WASH
The wash screen allows you to select between 5 different wash programmes.
When a programme is activated, if the chamber temperature is higher than the wash temperature (60 ºC),
the fan is switched on and the HIGH TEMPERATURE warning is displayed for the opening of the door. When the
door is opened, the screen displays the message COOLING until the wash temperature is reached. When the door is
closed and the START/STOP, pressed, the selected programme starts.
To Next Page
Loading...
