EasyManua.ls Logo

Fagor ADVANCE Series - Oven Dimensions Overview; 11.1. ACE-061 Dimensions

Fagor ADVANCE Series
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE MANUAL
ADVANCE OVENS
04/02/2020 20
10. GENERAL INFORMATION AND WARNINGS
BEFORE INSTALLING AND STARTING THE APPLIANCE, PLEASE READ THE INSTRUCTIONS
CONTAINED IN THIS MANUAL CAREFULLY.
THIS APPLIANCE IS INTENDED EXCLUSIVELY FOR PROFESSIONAL USE AND MAY ONLY BE
USED BY QUALIFIED PERSONNEL. IT MUST BE INSTALLED AND REPAIRED EXCLUSIVELY BY
AN AUTHORISED AND QUALIFIED TECHNICAL SUPPORT SERVICE.
THE MANUFACTURER MAY NOT BE HELD LIABLE FOR ANY PROPERTY DAMAGE OR
PERSONAL INJURY RESULTING FROM THE INCORRECT INSTALLATION, USE,
MAINTENANCE OR REPAIR, OR CAUSED BY FAILURE TO COMPLY WITH THE STANDARDS
AND INSTRUCTIONS PROVIDED.
The placement, installation, repairs and/or modifications must always be carried out by an
Authorised Technician
in accordance with the manufacturer's instructions and the
applicable regulations.
Any installations, adjustments or repairs carried out by unauthorised personnel, incorrect
maintenance or use, the use of spare parts other than those supplied by the manufacturer
and any other type of alteration to the appliance may cause damage or injury and result in
loss of cover under the warranty.
Ensure that the earth connection operates correctly and efficiently.
If the appliance breaks down, please call the Technical service centre. Do NOT try to repair
it or allow unauthorised or unqualified personnel to do so.
Do not change the position of or handle the machine components, as this may affect the
operating safety.
The dishwasher must be correctly levelled and the electrical cables, water and drainage
hoses must not be trapped or contain kinks.
The appliance has been designed to operate at ambient temperatures ranging from 5 C to
40 C and must not be used at temperatures below 5 ºC.
This equipment has been designed for processing food or similar. Any other use will be
considered inadequate.
During cleaning or maintenance operations, the mach
ine should be disconnected from the
electricity supply at the mains and the water inlet tap closed.
Abrasive or corrosive products, acids, solvents, or CHLORINE/HYPOCHLORITE-based detergents
must never be used.
The appliance or any of its parts must never be used as a support and objects must not be placed
on top.
Do not open the door of the machine while the machine is operating. Do not immerse hands in the
washing solution. Switch off the appliance and drain the tub before accessing the inside of the
machine.
Do not install the appliance in places exposed to jets of water.
IMPORTANT: WAIT AT LEAST 10 MINUTES AFTER SWITCHING OFF THE MACHINE BEFORE
CLEANING THE INSIDE OF THE APPLIANCE.
WARNING: DO NOT INSERT HANDS AND/OR TOUCH THE INTERNAL PARTS OF THE TANK WHILE
THE MACHINE IS OPERATING AND WAIT 10 MINUTES AFTER THE WASH TANK
HAS DRAINED.

Table of Contents

Related product manuals