SERVICE MANUAL
ADVANCE OVENS
04/02/2020 66
14.7.3. GAS OVEN CONNECTED TO EVACUATION FLUEPIPE (TYPE B13)
Convection/combined ovens with a non-return draught diverter system (special
accessory) may be connected directly to the fluepipe. The draught diverter
accessory can be ordered using the following references:
Oven model 061/101: 19012272 Oven model 201: 19012290
Oven model 102: 19012273 Oven model 202: 19012291
The gas supply to the oven should only be switched on once the extraction
system has been activated.
The exhaust gases reach very high temperatures.
The exhaust pipes must provide a hermetic seal. The materials used should provide thermal stability up
to temperatures of 400 ºC.
Warning
- The exhaust gases may reach high temperatures, therefore exhaust gases and hot plate components may cause
burns.
- Do not place combustible material on top of the appliance. Risk of fire!
- The exhaust gases may reach high temperatures, therefore exhaust gases and hot plate components may cause
burns.
- Do not place combustible material on top of the appliance. Risk of fire!
To Next Page
Loading...
