Fagor ADVANCE Series - 16.2. AE & AG Electric Oven Control Panel (from 01;01;2016)

SERVICE MANUAL
ADVANCE OVENS
04/02/2020 95
16. USE OF ADVANCE AE & AG OVEN
16.1. AE & AG ELECTRIC OVEN CONTROL PANEL (until 01/01/2016)
1-Turning the oven on
2- Turning the oven off
3 - General information text
4 - Cooking mode selector switch
5 - Cooking mode display
6 - Temp. setting selector
7 - Chamber temperature display / Chamber
temperature setting
8 - Time or core temperature setting selector button
9 - Remaining time or Core temp./ time setting or
core temp display
10 - (Time/Spike/Delta) function selector button
11- (Time/Spike/Delta) function display
12 - Power / Speed selector button
13 - Power / Speed display
14- Special options selector button
15 - Special Options display
16- Delayed programming selector
17- Configuration/Delayed Programming selector
switch
18- General Option Knob
19 - Start / Stop button
The interface designed for ADVANCE, ovens, with 11 buttons, a wheel with general purpose button and a 153x89
mm display lit from behind with a white backlight.
There is a main ON/OFF switch for switching the oven on/off, in addition to the START/STOP button so that the
oven starts or stops to adjust the settings.
There are also 2 buttons providing access to the Delayed Programming function or the Configuration of the System
functions, listed below. The remaining buttons allow the selection of the required line, rotating between the icons
on the row or selecting the display value shown using the available wheel. During the selection process, the icon or
display selected flashes (the name of the selected icon is displayed in the upper text), while the other icons in the
row are fixed. When the icon or required value has been selected, press the wheel to confirm the selection. If
confirmation is not received within 10 seconds from the last rotation of the wheel or the selection of the row, the
value or option selected will be confirmed.