SERVICE MANUAL
ADVANCE OVENS
04/02/2020 101
16.10. DELTA FUNCTION
The Delta Function operates with a difference between the core temperature and the oven temperature (50 ºC
default setting).
To select it, press Function Selector. All the options are lit and the selected option flashes. Turn the General Option
Knob to change the selection and select the Delta option. To confirm the selected option, press either the Function
Selector button or the General selector Knob.
The oven temperature is always 50 ºC higher than the temperature recorded by the core probe with the Delta
Function.
When the Delta Function has been selected, insert the spike into the food and close the oven.
The Time Setting indicates the core temperature of the product to be cooked. To change it, press Time Setting,
Spike and Delta Probe Selector and change the value using the General Selector. To confirm the new temperature
value for the Delta function press the Time Setting Selector or the General Selector.
The Time remaining display indicates the True temperature at the core of the food.
The Temperature Setting displays indicates a value 50 °C higher than the true core temperature and the True
temperature indicates the true temperature of the oven.
Next select the cooking mode as described in the previous paragraph.
After selecting the parameters, press the START/STOP button and the oven starts to work.
The range of temperatures available in Delta mode are as follows:
0 ºC-99 ºC 0 ºC-99 ºC 0 ºC-99 ºC 0 ºC-99 ºC 0 ºC-49 ºC
16.11. HEATING POWER AND FAN SPEED
The Heating Power and Fan Speed of the oven are selected by pressing the Power and Speed Selector and turning
the General Selector to obtain the required option. Confirm this value by pressing the Time Selector again or by
pressing the General Option Knob.
12 - Power / speed selector button.
13.1 - Maximum power / maximum speed display.
13.2 - Average power / maximum speed display.
13.3 - Average power / average speed display
13.4 - Average power / minimum speed display.
16.12. AUXILIARY FUNCTIONS (until 01/01/2016)
The Auxiliary Function of the oven is selected by pressing the Auxiliary Function Selector. All the Auxiliary Options
light up and the General Selector is turned until obtaining the required option. Confirm this value by pressing the
Time Selector again or by pressing the General Option Knob.
14 - Auxiliary Options Selector button
15.1 - Cool down display
15.2 - Humidifier display
15.3 - Descaling display
15.4 - Burner blocked display (GAS models)
To Next Page
Loading...
