SERVICE MANUAL
ADVANCE OVENS
04/02/2020 58
13.3. INSTALLATION OF FLOOR-MOUNTED MODELS
The mobile load trolley (optional) must be horizontal on the appliance.
13.4. LEVELLING
Fagor Industrial recommends that the place where the appliance is to be installed should be analysed prior to
installation to check that it is suitable.
For optimum operation, it is essential that the appliance is correctly levelled.
The appliances have adjustable legs to ensure they are correctly levelled. Turn the leg to obtain the required
height. The flooring on which the appliance is to be installed must be able to bear its full weight.
The installation location must be able to withstand the weight of the appliance.
The height of the legs can be adjusted by turning them to ensure that the appliance
is correctly installed. It is essential that the machine is correctly levelled.
Electrical cables, water and drainage hoses must not be trapped or contain kinks.
Turn the leg clockwise to extend and anticlockwise to shorten.
The installation of this appliance requires electrical and hydraulic connections, and an adequate
ventilation/extraction system due to the steam emitted by the machine.
13.5. MINIMUM DISTANCES
Warning: An excessive room temperature on the left-hand side of the
appliance may activate the appliance's safety disconnection.
Fagor Industrial recommend a distance of 500
mm on the left-hand side of the equipment to
leave room for repair and maintenance work.
Minimum distance from other sources of he
the left side 500 mm.
To Next Page
Loading...
