SERVICE MANUAL
ADVANCE OVENS
04/02/2020 96
16.2. AE & AG ELECTRIC OVEN CONTROL PANEL (from 01/01/2016)
2 - Turning the oven “OFF”
3 - General information text
4 - Cooking mode selector switch
5 - Cooking mode display
6 - Temp. setting selector
7 - Chamber temperature display / Chamber
temperature setting
8 - Time or core temperature setting selector
button
9 - Remaining time or Core temp./ time setting or
core temp display
10 - (Time/Spike/Delta) function selector button
11- (Time/Spike/Delta) function display
12 - Power / Speed selector button
13 - Power / Speed display
14- Special options selector button
15 - Special Options display
16 - Wash selector switch
17- Configuration/Delayed Programming
selector switch
18- General Option Knob
19 - Start / Stop button
The interface designed for ADVANCE, ovens, with 11 buttons, a wheel with general purpose button and a 153x89
mm display lit from behind with a white backlight.
There is a main ON/OFF switch for switching the oven on/off, in addition to the START/STOP button so that the
oven starts or stops to adjust the settings.
There are also 2 buttons providing access to Wash or System Configuration. The remaining buttons allow the
selection of the required line, rotating between the icons on the row or selecting the display value shown using the
available wheel. During the selection process, the icon or display selected flashes (the name of the selected icon is
displayed in the upper text), while the other icons in the row are fixed. When the icon or required value has been
selected, press the wheel to confirm the selection. If confirmation is not received within 10 seconds from the last
rotation of the wheel or the selection of the row, the value or option selected will be confirmed.
To Next Page
Loading...
