1· Time, type of execution ("single block"/continuous), program number, execution
status (in position, execution, interrupted or reset) and PLC messages.
2· CNC messages.
3· Blocks of the program currently selected.
4· Information of the axes. Target position of the movement (COMMAND), current axis
position (ACTUAL), remaining distance (REST) and the difference between the
theoretical position and the real position (FOLLOWING ERROR).
Spindle information. Programmed theoretical speed, speed in rpm and feedrate in
meters per minute.
5· Active G and M functions.
Number of consecutive parts executed with the program (PARTC), part execution
time (CYTIME) and PLC timer.
Changing the screen.
To Next Page
Loading...
