Fagor CNC 8055 TC - Speed Ranges (Gears)

SELF-TEACHING MANUAL
39
·TC· Option
MANUAL PRACTICE.
3
3.3.1 Speed ranges (gears).
The machine may use a gear box. Use these gears to select the best motor torque for the programmed speed. It is
recommended to always work at constant power to extend tool life.
Power. Power.
Constant power.Constant power.
For a work speed between N1 and N2, use GEAR 1.
For a work speed between N2 and N3, use GEAR 2.
SPEED RANGE (GEAR) ·1· SPEED RANGE (GEAR) ·2·