Fagor CNC 8055 TC - 3.4 Jogging the Axes

Self-teaching manual
40
·TC· Option
MANUAL PRACTICE.
3
3.4 Jogging the axes.
The axes may be jogged using the jog keyboard or handwheels.
Use the selector switch to select the type of feed.
Each key can move an axis in one direction,
according to the axes of the machine.
Jog keyboard.
It may have one, two or three handwheels. It follows
the turning direction of the handwheel.
Handwheels.
Movement with handwheels.
Movement in incremental jog.
Movement in continuous jog.