Fagor CNC 8055 TC - How to Change any Data of the Tool Table

Self-teaching manual
50
·TC· Option
MANUAL PRACTICE.
3
3.5.3 How to change any data of the tool table.
To change the tool data (T, D, A, B, C, R, location code, I, K) get into tool calibration mode and display the tool data.
The CNC shows the data for that tool. To change them, place the cursor on the value to be modified, key in the new value
and press [ENTER]. To select an icon, use the two-color key and press [ENTER]. To exit the calibration option, press [ESC].
+ (Tool number) +